Home > Power Management ICs >

NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi

Product Categories

Sanhuang electronics (Hong Kong) Co., Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi

Name: NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi
Brand: onsemi
Price: 1 USD

Brand Name : onsemi

Model Number : NCP133AMXADJTCG

MOQ : 1

Price : Based on current price

Payment Terms : T/T

Supply Ability : In stock

Delivery Time : 3-5 work days

Packaging Details : anti-static bag & cardboard box

Output Configuration : Positive

Output Type : Adjustable

Number of Regulators : 1

Voltage - Input (Max) : 5.5V

Voltage - Output (Min/Fixed) : 0.8V

Voltage - Output (Max) : 3.6V

Voltage Dropout (Max) : 0.25V @ 500mA

Current - Output : 500mA

Current - Quiescent (Iq) : -

Current - Supply (Max) : -

PSRR : 80dB ~ 70dB (1kHz)

Control Features : Enable

Protection Features : Over Current, Over Temperature, Under Voltage Lockout (UVLO)

Operating Temperature : -40°C ~ 85°C

Mounting Type : Surface Mount

Package / Case : 6-XFDFN Exposed Pad

Supplier Device Package : 6-XDFN (1.2x1.2)

Contact Now

Product Details

The NCP1338 combines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi−Resonant operation). The transformer core reset detection is done internally, without using any external signal, due to the Soxyless concept. The frequency is internally limited to 130 kHz, preventing the controller from operating above the 150 kHz CISPR−22 EMI starting limit.

Features

• Free−Running Borderline/Critical Mode Quasi−Resonant Operation
• Current−Mode
• Soft−Skip Mode with Minimum Switching Frequency for Standby
• Auto−Recovery Short−Circuit Protection Independent of Auxiliary Voltage
• Overvoltage Protection
• Brown−Out Protection
• Two Externally Triggerable Fault Comparators (one for a disable function, and the other for a permanent latch)
• Internal 4.0 ms Soft−Start
• 500 mA Peak Current Drive Sink Capability
• 130 kHz Max Frequency
• Internal Leading Edge Blanking
• Internal Temperature Shutdown
• Direct Optocoupler Connection
• Dynamic Self−Supply with Levels of 12 V (On) and 10 V (Off)
• SPICE Models Available for TRANsient and AC Analysis
• These are Pb−Free Devices

Typical Applications

• AC−DC Adapters for Notebooks, etc.
• Offline Battery Chargers
• Consumer Electronics (DVD Players, Set−Top Boxes, TVs, etc.)
• Auxiliary Power Supplies (USB, Appliances, TVs, etc.)

Specifications

Attribute	Attribute Value
Manufacturer	onsemi
Product Category	Linear Voltage Regulators
Series	-
Product	CMOS LDO Regulators
Type	500 mA Very Low Dropout Bias Rail CMOS Voltage Regulator
Packaging	Alternate Packaging
Mounting-Style	SMD/SMT
Package-Case	6-XFDFN Exposed Pad
Operating-Temperature	-40°C ~ 85°C
Mounting-Type	Surface Mount
Output-Type	Adjustable
Supplier-Device-Package	6-XDFN (1.2x1.2)
Voltage-Input	0.8 V ~ 5.5 V
Number-of-Outputs	1 Output
Current-Output	500mA
Voltage-Output	0.8 V ~ 3.6 V
Regulator-Topology	Positive Adjustable
Voltage-Dropout-Typical	0.14V @ 500mA
Number-of-Regulators	1 Regulator
Current-Limit-Min	550mA
Maximum Operating Temperature	+ 85 C
Operating temperature range	- 40 C
Output-Voltage	800 mV to 3.6 V
Input-Voltage-MAX	5.5 V
Output-Current	500 mA
Input-Voltage-MIN	0.8 V
Load-Regulation	1.5 mV
Voltage-Regulation-Accuracy	0.5 %
Package-Case	XDFN-6
Reference-Voltage	0.8 V
Dropout-Voltage-Max	250 mV
Line-Regulation	0.01 %/V
Power Supply Ripple Rejection (PSRR)	70 dB

Descriptions

Linear Voltage Regulator IC Positive Adjustable 1 Output 0.8 V ~ 3.6 V 500mA 6-XDFN (1.2x1.2)

LDO Regulator Pos 0.8V to 3.6V 0.5A 6-Pin XDFN EP T/R

LDO Voltage Regulators 500MA VLDO BIAS RAIL CMOS

China NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi factory

NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sanhuang electronics (Hong Kong) Co., Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!